MITASU OIL FILTER MO-117 FOR TOYOTA

Description

MITASU OIL FILTER MO-117 – Elite Filtration Core for Modern Toyota Engines

For everyday commuters, fleet operators, and vehicle owners who refuse to compromise on internal engine safety under dense traffic grids, the MITASU OIL FILTER MO-117 provides professional-grade filtration mechanics. Engineered by Mitasu Oil Corporation (Japan) to replace standard factory eco-cartridge configurations, this premium element is structurally optimized to manage extended oil change intervals while completely eliminating restriction paths. Featuring high-density calibrated multi-fiber pleated media, it safely isolates microscopic metallic debris, operational soot, and carbon build-up across extreme urban driving environments.

Key Features of MITASU OIL FILTER MO-117:

• Eco Cartridge Core: Engineered as a high-flow replacement element that locks perfectly inside the vehicle’s factory filter housing base with maximum operational integrity.
• Premium Structural Pleats: Uniformly spaced media layers prevent filter collapse or deformation during sudden oil pressure spikes or cold-start transitions.
• Complete Sealing Security: Accompanied by high-tensile thermal-resistant rubber O-rings to secure an airtight, leak-proof lockup inside the housing block.
• Unrestricted Flow Capacity: Delivers an continuous supply of clean lubricant directly into the engine, maintaining accurate pressure lines under intense heat thresholds.

Why Choose MITASU OIL FILTER MO-117?

The dense traffic gridlocks and dusty driving climate across Bangladesh put serious thermal stress on your motor oil, especially in modern stop-start hybrid blocks. Standard basic filters can clog early or restrict fluid flow when your engine works at peak operating thresholds. The MITASU OIL FILTER MO-117 available at Oil House Bangladesh acts as premium insurance for your engine, keeping your internal components cool, silent, and flawlessly lubricated.

Technical Specifications:

• Product Name: MITASU HIGH EFFICIENCY OIL FILTER MO-117
• Part Number: MO-117 (MC-117)
• Country of Origin: Engineered by MITASU OIL CORPORATION (Japan)

Application Instructions

1. Shut off the vehicle engine on level ground and let it cool down entirely.
2. Position a clean oil drain pan directly underneath the vehicle’s cartridge oil filter housing.
3. Use a proper fluted cartridge cap wrench tool to unscrew the factory housing cap counter-clockwise.
4. Extract the old used paper filter core and carefully pull off the old housing cap rubber O-ring seal.
5. Wipe the internal housing base completely clean of any residual sludge or engine carbon deposits.
6. Install the new premium rubber O-ring provided with your MITASU OIL FILTER MO-117 into the cap groove, coating it lightly with fresh oil.
7. Insert the fresh filter element into the housing cover and torque the cap back clockwise by hand, then tighten strictly to factory specification limits using a wrench (do not over-tighten to crack the housing).
8. Top up engine oil, run the engine for a brief period, and check for any underlying fluid leaks.

Vehicle Applications:

Alternative Interchanges (Cross Reference):

This premium high-performance component replaces and upgrades the following selected factory fitments:

• Toyota Factory OE: 04152-37010 / 04152-40060 / 04152-YZZA6 / 04152-B1010

• SAKURA: EO-1103

Note: Correct fitment depends entirely on your vehicle’s exact specifications. Please ensure you are 100% sure about your required part number or chassis code before finalizing your purchase. If you have any confusion, verify your factory manual or check with us to guarantee a perfect match before ordering.

Maintenance Tip from Oil House Bangladesh:

Modern Toyota engines operating with cartridge-style eco housings (especially the 1NZ-FXE, 2ZR-FXE hybrid configurations, or 3ZR-FAE platforms) feature narrow operational channels for variable valve duration mechanics. The extreme heat stress and intensive stop-start driving within Bangladesh prompt oil oxidation and drop protective pressure thresholds early. To counter abrasive scoring and keep your powertrain safe, we strongly recommend replacing your MITASU OIL FILTER MO-117 element at every routine fluid transition—ideally between 7,000 km to 10,000 km when utilizing premium full synthetic motor oils. Always replace the housing cap O-ring seal along with the element to maintain zero leaks.