LIQUI MOLY CERATEC 300ML

Description

LIQUI MOLY CERATEC 300ML – Premium Ceramic Engine Protection

LIQUI MOLY CERATEC 300ML is a top-tier wear protection product designed for modern automotive engines. It combines a high-tech ceramic compound with chemical anti-friction agents. The micro-ceramic particles are so small that they easily pass through oil filters, creating a protective coating on all metal surfaces inside the engine. This results in a significant reduction in friction and heat, which are the primary causes of engine wear.

Key Features of LIQUI MOLY CERATEC 300ML:

• Extreme Wear Protection: LIQUI MOLY CERATEC 300ML forms a durable ceramic layer that prevents direct metal contact, even under high stress.
• Fuel Efficiency: By reducing internal engine friction, it helps the engine run more freely, leading to lower fuel consumption.
• Long-Term Effect: One application of LIQUI MOLY CERATEC 300ML provides protection that lasts for up to 50,000 km, even after oil changes.
• Quieter Engine: Many users report a significant reduction in engine noise and vibration after adding LIQUI MOLY CERATEC 300ML.
• High Temperature Stability: It remains effective under extreme heat and pressure, making it ideal for turbocharged and high-performance engines.

Technical Specifications:

• Product Name: LIQUI MOLY CERATEC 300ML
• Volume: 300ml
• Base: Micro-ceramic particles and chemical friction modifiers
• Compatibility: Mixable with all commercially available engine oils (Synthetic, Semi-synthetic, and Mineral)
• Dosage: 300ml treats up to 5 liters of engine oil

Why Choose LIQUI MOLY CERATEC 300ML? In the demanding driving conditions of Bangladesh—characterized by heat, dust, and heavy traffic—engines undergo immense stress. LIQUI MOLY CERATEC 300ML acts as an insurance policy for your engine internals. It is particularly effective for vehicles with high mileage or those equipped with sensitive turbochargers and catalytic converters. By using this additive, you are investing in the long-term health and efficiency of your vehicle.

Frequently Asked Questions (FAQ):

1. When should I add it? It is best to add LIQUI MOLY CERATEC 300ML during a fresh oil and filter change.
2. Can I use it in a diesel engine? Yes, it is suitable for both gasoline and diesel engines, including those with Diesel Particulate Filters (DPF).
3. Will it clog my oil filter? No, the ceramic particles are so small (sub-micron size) that they flow freely through any standard oil filter.

Application Instructions

1. Ensure the engine oil is at operating temperature (warm).
2. Shake the LIQUI MOLY CERATEC 300ML bottle vigorously before use.
3. Pour the contents directly into the engine oil filler neck.
4. One 300ml bottle is sufficient for up to 5 liters of oil. For smaller engines, maintain a mixing ratio of approximately 6% of the total oil volume.
5. After adding, run the engine for a few minutes or take a short drive to ensure thorough mixing.

Maintenance Tip from Oil House Bangladesh

To maximize the benefits of LIQUI MOLY CERATEC 300ML, always use it in combination with a high-quality fully synthetic engine oil. While the ceramic coating lasts up to 50,000 km, we recommend reapplying it every 40,000 km to maintain the highest level of protection against the extreme heat and stop-and-go traffic common in our local environment.