LIQUI MOLY CATALYTIC SYSTEM CLEANER 300ml

Description

LIQUI MOLY CATALYTIC SYSTEM CLEANER 300ml

Special active solvent with a high-tech additive combination for removing typical contamination and deposits found in the intake and combustion system. The high cleaning effect ensures a clean catalytic converter and reduces the exhaust emissions. Dissolves and removes deposits and contaminants such as oil, resins, adhesive residues, etc. of the intake and combustion system. Increases the reliability of gasoline engines and the catalytic system.

Application

Pour additive into the LIQUI MOLY Pump-spray Bottle (part no. 3316). Pump up the pump-spray bottle. Establish access to the intake tract, ideally behind the turbocharger. Please note that the access must be located immediately behind the air-flow sensor. Start the engine and spray the additive into the intake tract at short intervals while the engine is at moderate speed (2,000-3,000 rpm). If the speed does not begin to fluctuate, the intervals between spraying can be lengthened. If the speed fluctuates sharply (<700 rpm), shorten the intervals between spraying. For fine atomization, check regularly that the pump-spray bottle has sufficient residual pressure. LIQUI MOLY cannot offer any warranty if the product is not used as specified in the product information or if dosing systems other than those indicated here are used. It is the responsibility of the user alone to verify the suitability of alternative dosing systems. To ensure optimum cleaning of the fuel system, we recommend adding Catalytic-System Clean (part no. 7110) to the fuel immediately after applying the additive. This will safeguard the cleanness of the complete engine system including the exhaust gas system.