K&N SELECT OIL FILTER SO-7020 FOR TOYOTA

Description

K&N SELECT OIL FILTER SO-7020 – Premium Protection for High-Capacity Engines

For owners of premium luxury cars, high-spec hybrids, and modern executive vehicles who expect maximum reliability under heavy driving loads, the K&N SELECT OIL FILTER SO-7020 provides professional-grade engine protection. Developed by K&N—a global leader in high-performance automotive filtration—the Select Series cartridge elements are built to support extended oil change intervals while maintaining an unrestricted flow of clean oil. It features a pleated synthetic-blend media that effectively isolates microscopic carbon build-up, combustion soot, and fine metallic debris, protecting tightly clear internal clearances from premature abrasive wear.

Key Features of K&N SELECT OIL FILTER SO-7020:

• Extended Life Engineering: Laboratory tested to provide continuous, dependable engine protection for up to 20,000 miles (approx. 32,000 km) when paired with premium full synthetic oils.
• 99% Filtration Efficiency: High-density synthetic-blend media is precision-pleated to trap 99% of damaging engine contaminants greater than 30 microns.
• Eco-Friendly Cartridge Design: Replaces only the internal filtration element inside your vehicle’s permanent housing shell, reducing heavy metallic canister waste during routine servicing.
• Complete Installation Kit: Packaged safely with premium-grade nitrile rubber replacement O-rings to guarantee a completely secure, airtight, and leak-proof seal.
• Optimal Viscosity Compatibility: Structured perfectly to handle low-resistance oil flow requirements for modern fuel-efficient specifications like 0W-20, 5W-20, and 5W-30.

Technical Specifications:

• Product Name: K&N SELECT OIL FILTER SO-7020
• Part Number: SO-7020
• Country of Origin: Engineered by K&N (USA)

Application Instructions

1. Turn off the vehicle engine on level ground and let it cool down entirely to avoid potential burns.
2. Position a clean oil drain pan directly underneath the vehicle’s permanent oil filter housing cap.
3. Use a specialized Toyota fluted end-cap wrench to safely unscrew the plastic or aluminum filter housing cover counter-clockwise.
4. Extract the used, oil-saturated cartridge element and carefully discard it.
5. Thoroughly wipe down the interior threads of the housing cap and replace the old rubber O-ring with the brand-new one provided in the box (lightly pre-lubricate the new ring with fresh motor oil).
6. Press the new K&N SELECT OIL FILTER SO-7020 cartridge firmly into the housing core until it seats completely straight.
7. Re-thread and hand-tighten the housing cap clockwise, then torque it carefully to factory specifications (do not over-tighten to prevent cracking the housing cap).

Cross Match & Detailed Fitment Guide:

Alternative Interchanges (Cross Reference):

This premium eco-cartridge component replaces and upgrades the following selected factory and performance part numbers:

• Toyota Factory OEM: 04152-31090
• DENSO: 260340-0600
• SAKURA: EO-1101
• PIAA: Z14-M

Note: Correct fitment depends entirely on your vehicle’s exact specifications. Please ensure you are 100% sure about your required part number or chassis code before finalizing your purchase. If you have any confusion, verify your factory manual or check with us to guarantee a perfect match before ordering.

Maintenance Tip from Oil House Bangladesh:

High-spec Toyota/Lexus engines, modern variable valve platforms, and hybrid powertrains rely heavily on instant, uninterrupted fluid flow parameters to seamlessly transition load distribution. Extreme urban stop-and-go driving across Bangladesh creates accelerated soot loading and oil shear stress. To prevent pressure variations and safeguard critical internal clearances, we strongly advise replacing your K&N SELECT OIL FILTER SO-7020 at every routine lubrication interval—ideally between 7,000 km to 10,000 km when paired with high-grade premium full synthetic lubricants. Always deploy the new rubber sealing ring included in the package to guarantee an airtight, zero-leak lockup.