K&N SELECT OIL FILTER SO-1008

Description

K&N SELECT OIL FILTER SO-1008 – Elite Protection for High-Performance Engines

For car enthusiasts and everyday drivers who refuse to compromise on engine safety, the K&N SELECT OIL FILTER SO-1004 provides professional-grade filtration mechanics. Manufactured by K&N—a global benchmark in high-performance automotive filtration—the Select Series is structurally optimized to manage extended drain intervals while completely eliminating oil restriction paths. Featuring high-density pleated synthetic-blend media, it safely isolates microscopic metallic debris, soot, and carbon build-up, maintaining structural protection across extreme urban or track environments.

Key Features of K&N SELECT OIL FILTER SO-1008:

• Extended Life Capacity: Laboratory tested to provide continuous, dependable engine protection for up to 20,000 miles (approx. 32,000 km) when paired with premium full synthetic oils.
• Premium Safety Mechanics: Formulated with an advanced silicone anti-drainback valve to neutralize dry-start wear and a heavy-duty bypass relief valve for unbroken lubrication lines.
• Structural Durability: A rugged steel canister shell counters sudden oil pressure spikes, while a high-tensile nitrile rubber gasket establishes an airtight, leak-proof seal.
• High-Flow Fluid Design: Delivers an unrestricted, rapid supply of clean lubricant directly into the engine block, optimizing performance under intense heat.

Why Choose K&N SELECT OIL FILTER SO-1008?

The dense traffic gridlocks and dusty driving climate across Bangladesh put serious thermal stress on your motor oil. Standard basic filters can clog early or restrict fluid flow when your engine works at peak operating thresholds. The K&N SELECT OIL FILTER SO-1008 available at Oil House Bangladesh acts as premium insurance for your engine, keeping your internal components cool, silent, and flawlessly lubricated.

Technical Specifications:

• Product Name: K&N SELECT OIL FILTER SO-1008
• Part Number: SO-1008
• Country of Origin: Engineered by K&N (USA)

Application Instructions

1. Shut off the vehicle engine on level ground and let it cool down entirely.
2. Position a clean oil drain pan directly underneath the factory filter housing base.
3. Loosen and extract the old spin-on canister counter-clockwise using a proper fluted filter wrench.
4. Thoroughly clean the engine block mounting plate and ensure the old rubber gasket came off completely with the old filter.
5. Coat the new nitrile rubber seal of your K&N SELECT OIL FILTER SO-1008 with a light layer of fresh engine oil.
6. Spin the new filter clockwise onto the threaded mounting post by hand until the gasket makes flush contact, then complete an extra 3/4 to 1 full turn to lock it in place (do not use mechanical tools to over-tighten).
7. Top up engine oil, start the vehicle to run for a minute, and carefully inspect for any underlying leaks.

Vehicle Applications:

Alternative Interchanges (Cross Reference):

This premium high-performance component replaces and upgrades the following selected factory fitments:

• Nissan Factory OE: 15208-65F0B / 15208-65F0A / 15208-ED50A / 15208-3J400
• Mazda Factory OE: PE01-14-302 / PY8W-14-302 / B6Y1-14-302
• Subaru Factory OE: 15208AA100 / 15208AA080 / 15208AA130
• Mitsubishi Genuine OE: MD134953 / MQ700013

Note: Correct fitment depends entirely on your vehicle’s exact specifications. Please ensure you are 100% sure about your required part number or chassis code before finalizing your purchase. If you have any confusion, verify your factory manual or check with us to guarantee a perfect match before ordering.

Maintenance Tip from Oil House Bangladesh:

High-efficiency SkyActiv and modern variable valve lift engines rely heavily on clean, immediate fluid pressure to operate internal timing sprockets and hydraulic lifters flawlessly. The high-heat, high-idle driving patterns inside Bangladesh break down engine oil and drop pressure thresholds early. To counter internal abrasions and secure optimal flow, we highly recommend replacing your K&N SELECT OIL FILTER SO-1008 at every oil change interval—ideally between 7,000 km to 10,000 km when running alongside high-grade premium full synthetic lubricants. Always ensure the mounting thread plate is fully wiped clean before spinning on the new canister.